Showing posts with label NOV Technology. Show all posts
Showing posts with label NOV Technology. Show all posts

Monday, November 27, 2017

The Connection in Oil Gas Drilling with new Technology

NOV connection technology drilling rig

As the drilling landscape changes, an upturn in land factory drilling projects drives the need for efficient, high-performance products and technologies. NOV addressed the needs of this shifting market by developing the Delta line of rotary-shouldered drillpipe connections. These connections are stronger and more fatigue-resistant than other rotary-shoulder connections, and this allows a simplified threading procedure, which excludes the need for cold rolling, reducing the cost of maintenance and therefore lowering the total cost of ownership.

Performance-wise, the connection delivers on average 4% more torque than the XT connection. Using streamlined 130,000-psi tool joints, the Delta connection improves hydraulic performance by allowing the use of a larger-than-normal pipe body size. For example, 5½-in. drillpipe can be used to drill in the size of hole in which 5-in. drillpipe was previously used. This is made possible because the outside diameter of the tool joint is identical to the industry standard for 5-in. drillpipe (65⁄8 in.).


In addition to significant reduction in pressure losses, the connection also allows better borehole cleaning since fluid circulates at a higher velocity outside of the drillpipe. The stiffer pipe allows the drilling of a better quality hole.
The modified geometry of the Delta connection engages more threads at stab-in. This minimizes stabbing damage while also evenly distributing stress.

The deeper stab-in also reduces the number of turns necessary to make up the connection, increasing efficiency and reducing wear on the threads.

Compared to similar products, the Delta connection requires 50% fewer turns from stab to makeup. The connection saves time in that it can be spun in as little as four seconds, while XT connections typically require eight seconds.

This decreased connection time translates to increased cost-effectiveness and ease of use on the rig floor. Ease of use is further improved by a reduction in the minimum required tong-gripping distance from the box face. When other connections require a 2-in. tong-free area to prevent egging of the box connection, the Delta connection only requires ½ in. of tong-free area, giving drillers more flexibility in the positioning of the iron roughneck.

Reduced cost of ownership

One of the main objectives while developing this connection was to reduce the cost of ownership. NOV determined the best way to achieve that goal is to keep the connection in service and reduce the frequency of repair. Multiple design choices contribute to maintaining the Delta connection—and the joint of drillpipe that carries it—in the field while drilling. First, wider field inspection tolerances reduce the need for frequent repairs without compromising the connection’s performance. Second, a tolerance for pitting in the root of the less critical threads was established. Besides these inspection criteria changes, the geometry of the new connection reduces the material loss by 30% for face-and-chase repair operations.

This allows more recuts using the same tool joint tong space. The reduction of the tong-free area on the tool joint results in increased room for recuts given the same tool joint length. The total refacing amount has been increased by 50%, allowing additional refacing to take place before a recut is needed.

Best practices were developed by the company for its licensees in the shop environment for these recuts. These practices will result in less than a 1-in. loss on pin or box for a full face-and-chase repair. The connection also has the lowest royalty on repair services across all of NOV’s double-shoulder connections. The Tuboscope Business Unit within NOV Wellbore Technologies further supports the connection with reduced repair rates to pipe owners and the option to include the TracID radio frequency identification-based tagging and inventory management system as part of the base configuration for the pipe connection. In support of the Delta connection NOV developed rig-ready upgrades such as the TDS-11SAH top drive, ST-80X iron roughneck and a 7,500-psi pump.

Before its introduction to market the Delta connection underwent extensive testing at NOV’s research and technology development center, with early results demonstrating that the new connection made up twice as fast as its predecessor. During testing, damage was minimal and was primarily related to handling. Generally, only refacing was required to repair the damage.

Case studies

The first string of drillpipe with the Delta connection was used to drill a well in the Permian Basin and was the subject of intense scrutiny. This initial drilling job was very successful, and the 5½-in. drillpipe with the Delta 544 connection delivered as expected. The drilling project finished ahead of schedule, and the hole quality of this longest lateral for the operator in this field was excellent, with smooth running of the casing string. A post-use visual inspection of the connections was conducted and confi rmed that the Delta string was in excellent condition after drilling the well. The rental string was retained by the operator and will be used again to drill another pad.

Two other strings with Delta 544 connections were deployed in April 2017, one in the Gulf of Mexico (GoM) and another on a land rig in West Texas. Once again, the customers found the product easy to use, and the field service personnel who were dispatched to these rig sites could see that drillers quickly became comfortable with the new connection.

In June the different sizes of the Delta connections were used on land and offshore. The Delta 425 on 4½-in. drillpipe was used in the GoM, South Texas and the Bakken Shale. Field service staff went to the rig site and saw the same pattern repeated: ease of use, low damage rates and satisfied end users. Drilling crews were at ease with the product and rapidly embraced its use. In addition, a string has been deployed to the Middle East for testing.

In all cases, the condition of the connection was visually evaluated after use, and so far none have required rethreading. This is extremely encouraging to the early users, and NOV looks forward to gathering more data once these strings have received a full visual and dimensional inspection of the Delta connections.
Read More → The Connection in Oil Gas Drilling with new Technology

Rig Automation Maximizes Value For Contractors And Operators

oi gas drilling equipment

Drilling a well is a complex mix of overwhelming data and tasks in need of constant attention. To address the challenge of repetitive complexities of machine and process control, the NOVOS process automation platform was launched by NOV after an extensive development period.

The system provides a common platform for the control, monitoring, scheduling and optimization of drilling operations. This enables drillers to focus on what is important while they consistently execute repetitive drilling activities to achieve the well program by integrating the best of human and equipment capabilities.

offshore rig

The NOVOS process automation platform manages rig equipment to execute drilling programs, allowing the driller to focus on safety and process execution. (Source: NOV)


Compatibility

The structuring of data and defining activities through process automation enables engineers to develop lessons learned and apply best practices across regions and rig fleets, regardless of rig specifications or location. The system is scalable, not custom-built, so it does not require extensive R&D for it to work with each new deployment.

NOVOS is simply dropped on top of the existing NOV control system, creating a quick and rapid deployment. The scalable installation enables the system to be easily placed on rig fleets, which increases overall consistency, enhances the performance of the entire fleet and gives the end user the ability to plan ahead.

The system is equipped with applications that immediately allow the rig to drill faster, safer and more effectively. It also has the capability to incorporate customized applications for specific drilling requirements.

A software development kit allows developers to create and deploy their own optimization applications that use sensor data to control rig machines. Third parties are provided with safe access to a wide variety of functions within the system and encouraged to develop applications that address their unique challenges. Those applications can then be layered, prioritized and partitioned to provide simple flexibility of control and monitoring in ways that were previously unachievable.

There are five major operators and service companies working to develop applications compatible with the platform, with development pending with nine more companies.

The platform today

Years of development were spent to ensure NOVOS was built with a foundation of stability, flexibility and ease of scalability to be valuable in bringing practical automation to the drilling process.

In the years since its launch the platform has successfully been installed and commissioned on 19 land rigs. There are five additional installs scheduled but pending rig availability. The system is installed on rigs in Oklahoma, Pennsylvania, Texas and Canada. Precision Drilling currently has the system installed on 18 land rigs. In second-quarter 2017 a system was purchased by Beaver Drilling for installation on its Rig 15.

The NOVOS team is actively training drillers on rig location depending on rig and resource availability. During the training process drillers are easily picking up the system and becoming even more proficient over time.

Value in the numbers

NOVOS was recently deployed during a rig move for Precision Drilling. The early results showed the company’s drillers achieved consistent bottom-to-bottom time savings—a 10% improvement bottom-to-slips, 18% faster add-stand and a 67% improvement slips-to-bottom—yielding overall time savings of 41% per connection.

To evaluate connection time improvements, NOV compared the five best consecutive bottom-to-bottom cycles for conventional drilling against five consecutive cycles of NOVOS-enabled drilling. There was a reduction in average bottom-to-bottom time from 7.91 minutes to 4.67 minutes using NOVOS, demonstrating a significant improvement in Precision’s performance. The increased consistency created by automating repetitive tasks resulted in an increased awareness of safety and successful delivery of the overall drilling operation.

Assuming six wells per pad and 20 total days of drilling time per well, connection time savings translated to nine hours saved per well and 2.25 days saved per pad on average, enabling the drilling contractor to better plan service delivery, allocate resources and move quickly to the next pad. The total savings added up over time yielded higher profits and rates of return on the customer’s initial investment.

drilling operation

Precision Drilling saw a savings in overall connection-to-connection time and delivered a consistent drilling process with its use of NOVOS. (Source: NOV)


Next steps

As NOVOS begins to make its way on to several rigs, the surface is just being scratched on how the automation can be used. There are many repetitive functions that are still performed manually that can be brought into the control system. Right now, consistent and repetitive tasks are automated on the drill floor, but there are other areas on the rig where repetitive tasks could be automated.

Features added since the release of NOVOS include, but are not limited to, reaming, rocking, torque and drag, and a downlinking interface. The ease of updates and enhancements further shows the flexibility of the NOVOS platform. As for next steps, an improved user interface based on driller feedback also is being developed. The additional features and new user interface are scheduled to be released in third-quarter 2017, and work toward finalizing offshore capabilities for gel breaking and envelope protection are underway.
Read More → Rig Automation Maximizes Value For Contractors And Operators